Auto Water Lifter Control, Model AWLC-1

 
automatic water lifter tullu pump control
 
 

Check Price | See Demo | Save Information | Buy Now

 
 

To know sensaswitch users near you, SMS your area/city to 9814055314 

 
     
      • Control Function
      • It ensures plenty of water with peace of mind for people living in multi-storey buildings in water shortage areas (low water supply pressure areas).
      • It automatically starts water pump when overhead tank becomes low and lower (ground level / under-ground) water tank has sufficient water in it.
      • It stops water pump automatically when either overhead water tank reaches full level or lower (under-ground/ground level) water tank becomes empty.
      • Control Application
      • For single phase (220 vac) supply pumps
      • For single switch (ON/OFF) operated
      • Pump sets upto 1 Hp, max (5 amps running load)
      • Pumping up raw (unprocessed) water
      • Important Features
      • Upper & Lower water tank level low indications on panel.
      • Auto / Manual toggle switch to run pump manually if needed. 
      • Pre-connected maintenance free water sensor sets, suitable for most water tanks.
      • 10 amps rated control switch to run single phase, single switch operated pump set up to 1 Hp.
      • Easy to understand and install with mains power and water sensor signal connectors.
      • Water Sensor Set
      • Maintenance free water sensors, for raw (unprocessed tap/ground/ sea) water.
      • Not suitable for processed (Dm/ Ro) waters and waste (sewage / storm/ sludge) water.
      • Suitable for use in water at normal ambient temperatures (5- 50 degree Celsius).
water sensor set
Overhead Water Tank Sensor Set
water level sensor
Lower (under-ground/ ground floor) Water Tank Sensor Set
      • Installation & Connections
      • Main control unit must be installed at a place safe from rain water and splashes.3
      • Water sensors should be placed in freely hanging position in water tank (no fixing required).
      • 2 pair telephone signal wire .40mm copper recommended for use as signal wire.

install water control system

Check Price | See Demo | Save Information | Buy Now

To know sensaswitch users near you, SMS your area/city to 9814055314