SensaSwitch-AWLC water level control is fairly easy to install as its connection leads has been properly marked, color matched and housed to make installing and connecting a straightforward. Input supply wire is is ready to plug in with 3 pin plug, output terminals are safely housed in 2pin terminal strip. Upper tank and lower tank sensor connectors 3 pin connectors are color matched with red and blue sleeves, and will connect only in correct manner. The video shows setup stepwise
The diagram illustrates the configuration of the automatic water level control system, including the connections to a single switch and a 220-volt-operated pump motor.
Important Notice: The AOLC devices are designed to be connected specifically to a single switch, a 220-volt motor or starter box. To prevent any potential issues, please ensure that your motor switch starter is compatible as outlined below. If you have any uncertainties, kindly provide an image of your water pump motor switch/starter, and we will recommend the most suitable model for your needs.
Here is a comprehensive step-by-step setup guide. Kindly click the link below to download the guide.
Commentaires